Project Background
For this infrastructure order in Africa, the customer’s list was clear: steel props in 3m, 4m, and 5m lengths. Before the factory started production, we checked the EN1065 requirement again and confirmed the prop details with the customer.
We did not quote this order only from an online message. At the meeting, we checked the main order points with the buyer. These included the EN1065 standard, the prop lengths, the adjustment sleeve, the locking pin, the delivery time, and the packing before shipment. After returning from the visit, we sent the quotation and confirmed the same details by message.
After the visit, the customer continued the discussion with our sales team. For this order, the focus was not on a large first purchase. The customer chose a trial order first. That is common when a new buyer checks a new supplier, especially for infrastructure materials that need to match site use and local procurement habits.
Project Information
Infrastructure Steel Prop Supply| Project Location | Africa |
|---|---|
| Application | Infrastructure |
| Standard / Material | EN1065 Steel prop |
| Product Supplied | Steel Prop |
| Shipping Time | August 2025 |
| Buyer Type | New infrastructure project buyer |
Confirming the Steel Prop Requirement
The buyer’s order list included steel props in 3m, 4m, and 5m lengths. We checked the EN1065 requirement before production and used it as the confirmed supply standard for this order.
The project record did not show a separate steel grade. For that reason, this case page only records the confirmed standard, the product type, and the three requested lengths.
During the follow-up communication, our team sent the technical parameters and quotation. The customer also asked about the production standard, process, and delivery schedule. We answered these points before the order was placed, because the buyer needed a clear basis for a remote purchase.
The photos from the factory show the finished props with square end plates, round steel tubes, adjustment holes, threaded sleeves, and locking pins. The close-up measurement photo also shows the threaded adjustment section and pin area. These details help buyers check whether the prop structure matches the type they need on site.
Before packing, we checked the visible parts one by one from the finished props. The holes, threaded sleeve, locking pin, end plate welds, and surface finish were all checked in the factory photos.
The order included 3m, 4m, and 5m adjustable steel props. The factory placed the different lengths together for inspection. After that, the props were strapped into bundles and prepared for loading.
Factory Check Before Shipment
Before shipment, the factory checked the finished props in the workshop. The photos show several groups of galvanized props arranged in bundles. The end plates are visible at both ends of the bundles, and the props are strapped for handling.
The individual product photo shows three props laid on the factory floor. This image is useful for the project page because it shows the product structure clearly. Buyers can see the perforated inner tubes, square base plates, and locking pins. It works better as the main project image than a wide warehouse photo.
The measurement photo should be placed near the specification section. It shows the threaded part of the prop with a measuring tape. This does not replace a technical drawing, but it gives the reader a real inspection view from the order record.
The wider warehouse photos should go near the production and packing section. They show the finished EN1065 steel props stacked in groups before dispatch. The images also show that the props were bundled instead of being loaded loose. For export buyers, this is useful because long steel products need stable bundling for factory handling and later transport.
Packing and Loading
The factory packed the steel props in bundles before pickup. From the packing photos, some layers had wooden spacers between them.
The factory arranged loading in August 2025. From the photos, the props had already been bundled before the truck came in. We can see the bundles on a flatbed truck at the factory, so I would only describe this as factory loading, not container loading.
The buyer later received the goods and confirmed arrival with our sales team.
What Similar Buyers Can Check
For a first EN1065 steel props order, buyers should confirm more than the price. The standard, length range, surface finish, end plate type, packing method, and shipping plan should all be written down before production starts.
This order included 3m, 4m, and 5m props in one shipment. Because of that, we checked how the factory would separate the different lengths before packing. This is a small point, but it helps the buyer’s warehouse team sort the props faster after unloading.
Product photos also help before shipment. For this order type, useful photos include the threaded sleeve, locking pin, end plate, weld area, and bundled props. These details are easier to confirm at the factory than after the goods leave.
The Africa order started from an in-person visit and then moved to a trial order. After the visit, we did not rush the order into production. We went back over the EN1065 requirement and the prop details with the buyer. When the props were finished, the factory sent photos for checking. Then the goods were bundled and shipped in August 2025.
